How To Add Line On Rear View Camera On Kia Sorento 2011

Download Article

Download Commodity

A rear-view camera, as well known equally a fill-in camera, lets y'all see what'due south behind your vehicle without having to look backwards. Though the device comes standard with many new car models, you can add together a rear-view camera to your vehicle if information technology didn't come up with one.

1. one

   Buy a mountable backup camera for your specific vehicle. For prophylactic, make sure y'all purchase a device specifically designed to be a rear-view photographic camera. Purchasing one made for your specific vehicle volition make information technology easier to install than a standard aftermarket camera. And then you lot tin install information technology easily, look for a camera that mounts onto or directly behind your license plate.^[1]

   • Look for fill-in cameras at consumer electronics stores.

2. two

   Get an external monitor if you want to keep your existing rear-view mirror. An external backup monitor is a small video screen that mounts onto your windshield similarly to a GPS. Though they accept up more space than internal monitors, external monitors are far easier to see and can exist easily replaced if necessary.

   • If yous'd like, you can utilize a standard video monitor instead. However, go on in mind that it may non have nevertheless features every bit devices designed for use with backup cameras.

   Advertising

3. three

   Purchase an internal monitor for a less obtrusive device. An internal backup monitor is a fully functioning rear-view mirror that houses a small-scale screen inside the glass. Some internal monitors prune on peak of your current rear-view mirror, just others replace your original mirror entirely.^[2]

   • Most internal monitors shut off and disappear when not in employ, making them a perfect option if yous desire to preserve your car'south looks.

4. 4

   Purchase power and video cords if your camera and monitor didn't include them. For most rear-view camera installations, yous'll demand camera and monitor splitter cords with connectors for video and power cables, 2 bare wire power cables, and an RCA video cablevision.^[3]

   • Most installation kits include these cables, but some may require you to purchase them separately.
   • Some camera models apply wireless transmitters instead of standard video cables.

Advertisement

1. 1

   Accept off your rear license plate. Using a Phillips head screwdriver, remove each of the screws property your rear license plate in place. Then, pull the plate off and fix it aside.^[4]

   • Brand sure y'all place the screws in a rubber identify then you don't lose them.

2. 2

   Remove your trunk's interior console. Pop open your trunk and expect for a solid interior panel covering the contrary side of your license plate mounting surface area. Then, insert a trim removal tool or other thin device behind the panel and pry it off.^[five]

   • Removing this console will expose the motorcar's rear wiring chambers.

3. 3

   Drill a small hole in the license plate mounting area. Brand sure there are no obstructions between the license plate mount and the rear wiring sleeping accommodation. And then, create a minor hole in the machine using a ability drill equipped with a high-speed twist drill bit. Line upwardly your hole so information technology is directly behind where your camera'south ability and video cable will go.^{[half dozen]}

   • To effigy out where to make the hole, concur your photographic camera upwards to the area you intend to mount information technology. Then, note the spot where its splitting string sits.
   • Create a hole that's large enough to fit your camera's power and video cable.
   • If you come beyond any obstructions, try to remove them. If you can't, see if yous can make a pigsty nearby.
   • For most jobs, you'll need a drill chip that has a diameter betwixt ¹⁄_eight and ⁱ⁄₄  in (0.32 and 0.64 cm).

4. 4

   Identify a rubber grommet effectually your camera cable. Before running your photographic camera cable into the motorcar, sideslip a rubber grommet onto it almost the not-splitting end. These small-scale rubber washers, available at most home comeback stores, will keep the wire in place and foreclose leaks.^[7]

   • Cull a grommet that's just large plenty to fit inside the drilled hole.

5. five

   Run the camera cable into your trunk. Pull the splitting end of your camera's video and power cablevision through the drilled hole into the trunk of your car. Make sure you pull information technology tight and so the rubber grommet lodges into the drilled pigsty.

   • Your camera cable should run from the outside of the machine to the inside of the car.

6. 6

   Locate your automobile'due south two reverse low-cal wires. Reverse light wires are the cords that connect your automobile's tail lights to the dashboard. They hook directly into your vehicle's tail lights and are normally located in the hatch or body of your car.

   • These cords look different for every vehicle so, if you tin can't find them, consult your owner'southward manual for model specific data.

7. 7

   Strip and divide your machine's reverse calorie-free wires. Using a wire stripper or pliers, peel dorsum the rubber roofing the wires. Then, apply a screwdriver or other thin tool to poke a hole through the heart of each exposed wire, separating the private wire strands.^[8]

   • For safety, make sure yous practice this while the automobile is turned off.

8. eight

   Fuse your camera wires with the reverse calorie-free wires. Attach 1 of your bare wire cables to the camera cord'southward power connector. Then, poke your bare wires through the center of the exposed reverse light wires and twist them together. For prophylactic, make sure you wrap the combined wires in electrical tape.^[9]

   • Make sure y'all poke your positive (usually ruby-red) bare wire through the positive reverse lite wire and the negative (usually black) bare wire through the negative opposite light wire.

Advertisement

1. 1

   Road your camera's video cable to the front of the car. Connect your RCA cable to the photographic camera cord's video connector if necessary. Then, run it through your vehicle to the area past the fuse box. Depending on your vehicle model, you'll normally be able to do this past peeling back the automobile's headliner or side panels and pulling your cable through the exposed chamber.^[ten]

   • For certain trucks, you lot may need to run the video cable through the vehicle'due south frame rail.
   • In most cars, you'll find the fuse box underneath the steering bike.

2. two

   Fix external monitors to the front end windshield. If you're installing an external monitor, get-go attach your device's included mountain to the windshield past post-obit the manufacturer'due south included instructions. Then, hook your monitor onto the mountain.

   • Near external monitors use a suction mount, though others may come with a more complex mounting organization.

3. 3

   Attach internal monitors to the rear-view mirror or mirror mount. For certain internal monitors, you'll need to clip the new device onto your electric current rear-view mirror. For others, you'll need to take off the mirror and slide your monitor into the pre-existing mirror mount.^[11]

   • Some internal monitors may come with their own mounting system that you'll have to attach to the machine's front windshield.

4. 4

   Run the monitor'due south splitter cablevision to the fuse box. If necessary, hook your monitor's power and video cable into the device. Then, route the cablevision from the monitor to the area adjacent to the fuse box.^[12]

   • If you'd similar, use a trim removal tool to pop out the headlining panel direct above your windshield. And then, run your cable through the exposed chamber.

5. v

   Connect your monitor's camera cablevision to the RCA cablevision. After routing your monitor's splitter cablevision, connect the video end of the cablevision to your camera's RCA cord. And so, wrap the connected cords with electric record to agree them together.

   • If your RCA and video cables have the same ends, y'all may demand to buy an RCA male to female converter cord. Y'all can detect these at almost electronic stores.

6. half-dozen

   Attach your monitor'southward power cable to a fuse tap. Connect your remaining bare wire cable to the fill-in monitor's power string. Then, button the positive (usually ruby-red) end of the bare wire cable into the open up end of a fuse tap. Finally, crimp the 2 cables together with a pair of pliers.^[13]

   • A fuse tap is a pocket-size cable that converts a bare wire into a fuse point. You can find them at well-nigh machine function stores.
   • If you'd prefer, you tin leave the bare wire cable off and connect your camera's ability cable to a cigarette lighter adaptor. Then, plug this adaptor into your motorcar'due south cigarette lighter receptacle for power.

7. 7

   Plug the fuse tap into the fuse box. Locate your fuse box and open it up. Then, plug your fuse tap into an open fuse cell. If necessary, check your fuse box'southward lid or your vehicle's didactics transmission to see which slots are open.^[14]

   • After attaching your fuse, consider taping all your wires together using electrical tape to become them out of the style.

Advertisement

1. i

   Connect your backup photographic camera to its power and video cable. Return to the dorsum of your car once yous've installed the rear-view monitor and all the necessary photographic camera cords. Shut the trunk if necessary, then connect the backup camera to its ability and video cablevision.

   • Your photographic camera's ability and video cablevision should be sticking out of the hole you drilled in the license plate mounting area.

2. 2

   Mount the photographic camera to your license plate. If the camera attaches to the front of your license plate, fix it to the plate by post-obit the manufacturer'south included instructions. If the camera attaches to the dorsum of your license plate, line the device up with the plate's fastener holes and thread screws through them.^[15]

   • In nearly cases, you tin attach a rear-view camera to the back of your license plate using the screws you removed from the car earlier.

3. 3

   Reattach your license plate and trim panels. Using a Phillips head screwdriver, put your rear license plate back on your vehicle. Once you've reattached it, give the license plate and backup photographic camera firm tugs to make sure they're secure.

   • If you haven't already, reattach your auto's interior body panel and other trim panels by pressing them back onto the vehicle.

4. four

   Test the camera to make sure everything works. Before using your new camera on public roads, examination it in a safe area like your driveway. If information technology turns on, identify a large, durable object like a trash can behind the camera to come across how distorted the image is. If it does non turn on, read your installation manual for troubleshooting information.

   • In many cases, rear-view camera malfunctions are caused by loose or improperly connected wires.

Advert

Add New Question

• Question

  I hooked the camera up and it just flickers. Any communication?

  

  You may desire to ensure all cables and connections are secured tightly. Double check that all connections are right. If this doesn't piece of work, check to see if the camera chosen is in good shape and isn't physically damaged.

• Question

  Suzuki installed reverse parking photographic camera in my Swift Dzire Zxi. But the camera shows upper view and non the footing below. What tin I do ?

  

  Make certain that the camera is installed the correct manner (not upside down), and check the position of the camera mounted. Take it back to the dealer that installed it and ask them to check the alignment and fit.

• Question

  What is the best height for a reversing camera?

  

  At that place is no optimal height for a dorsum-up camera. The ideal tiptop is based off the specific car or vehicle that you have and your personal preferences, along with its intended awarding. Some dorsum-upwards cameras are placed on large service trucks so that they can line up to trailer hitches easier, some are to prevent a blindspot on the road. Depending on your awarding, it can exist placed at any peak. Nearly reversing cameras are a "wide view" style and the specific height location does not always affect the way it functions.

• Question

  So if I hooked upward all the wires correctly but still no power, is it a fuse tap that I need to splice into the wires for information technology to piece of work correctly?

  

  Shannon Phillips

  Customs Answer

  Cheque your earth or ground information technology may be bad. Use your multimeter to run into if the ground is okay.

• Question

  Is it however okay to connect the back-up camera to the opposite low-cal with cars that have auto lighting? Or, would I need to connect to the contrary wire on the gearbox?

  

  Shannon Phillips

  Community Answer

  Yes, that will exist fine, that how information technology is supposed to exist done. Look for an automobile electrician if you need someone to call.

Ask a Question

200 characters left

Include your e-mail address to go a message when this question is answered.

Submit

Advertisement

• Though about car dealers and mechanics will non install aftermarket backup camera systems, many sound and electronic shops will.

Advertisement

• Make sure yous turn the car off earlier working with bare or stripped wires. If you need to touch exposed wires while the car is on, put on a pair of stupor-resistant rubber gloves.

Advertisement

Things You'll Need

• Rear-view camera
• Rear-view monitor
• Connector cables
• Phillips head screwdriver
• Trim removal tool
• Power drill with loftier-speed twist chip
• Safety grommet
• Wire stripper or pliers
• Electrical tape
• Fuse tap

Almost This Commodity

Article Summary X

To successfully install a rear-view camera, get-go remove your vehicle's rear license plate and interior trunk panel. Using a power drill, punch a small hole through the exposed license plate mounting area and run your camera's power and video cord through it. Attach a bare wire power cable to your camera's power connector, then strip your car's contrary light wires and splice them with your bare wire power cable. To learn how to mount the rear-view photographic camera and fill-in monitor, scroll down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 260,474 times.

Did this article assistance y'all?

Source: https://www.wikihow.com/Install-a-Rear-View-Camera

Posted by: freyfacharnmethe.blogspot.com

Share this post